prince_waiting
12-12 12:31 PM
Montgomery - Huntsville = 190 miles
Montgomery - Mobile = 170 miles
Montgomery - Birmingham = 90 miles
So effectively Montgomery is the center point and as suggested by cooldude** is a good meeting place.
If the meet is convened in Birmingham then it is 260 miles one way distance for Mobile effectively dissuading any Mobile members from active participation.
Your take on the meeting place guys.
Looks like a toss up between Birmingham and Montgomery.
Montgomery - Mobile = 170 miles
Montgomery - Birmingham = 90 miles
So effectively Montgomery is the center point and as suggested by cooldude** is a good meeting place.
If the meet is convened in Birmingham then it is 260 miles one way distance for Mobile effectively dissuading any Mobile members from active participation.
Your take on the meeting place guys.
Looks like a toss up between Birmingham and Montgomery.
wallpaper Metal Non-Ferrous
GCSeekerCT
08-21 07:47 PM
Thanks for your opinions.
Sorry, I should have included my Category EB2 and Country India in the original post.
I am leaning more towards AC21 as well. But not sure how it will affect the overall scenario (as far as paperwork right now and may be years from now).
I have been patient enough for 5+ years and one thought says "stick it out" the other says "enough is enough, its time to move on"
I am sure there are many on the board like me, and I guess I am looking for some courage, either way.
Sorry, I should have included my Category EB2 and Country India in the original post.
I am leaning more towards AC21 as well. But not sure how it will affect the overall scenario (as far as paperwork right now and may be years from now).
I have been patient enough for 5+ years and one thought says "stick it out" the other says "enough is enough, its time to move on"
I am sure there are many on the board like me, and I guess I am looking for some courage, either way.
herns
03-07 08:38 PM
I dont know what country you belong to. Only issue here is, if you get an RFE when you're unemployed.
[/I]
THanks for your reply.
I fall under 3rd employment based category that got stuck May 01, 2005.
http://travel.state.gov/visa/frvi/bulletin/bulletin_4428.html
I have few colleagues that got only 1 (one) RFE for their I-485 such as birth certificate, one got missed physician signature on one document, the other got no RFE and the green card did just appeared. How I wish I could have an RFE similar with these or nothing at all.
[/I]
THanks for your reply.
I fall under 3rd employment based category that got stuck May 01, 2005.
http://travel.state.gov/visa/frvi/bulletin/bulletin_4428.html
I have few colleagues that got only 1 (one) RFE for their I-485 such as birth certificate, one got missed physician signature on one document, the other got no RFE and the green card did just appeared. How I wish I could have an RFE similar with these or nothing at all.
2011 Non Ferrous Metals
gc_on_demand
04-24 09:47 AM
Good Question. Why no one from IV posted that yet?
Guys
If you recall IV posted news that there will be 3 bills in house regarding backlog. Immigration-law.com didnot even know at that time. I agree that IV didnot post about their movement on bill. IV core team might be busy on lobbying. Just wait and watch.
Will there be two bills for STEM and allowing people to file I 485 ?
Guys
If you recall IV posted news that there will be 3 bills in house regarding backlog. Immigration-law.com didnot even know at that time. I agree that IV didnot post about their movement on bill. IV core team might be busy on lobbying. Just wait and watch.
Will there be two bills for STEM and allowing people to file I 485 ?
more...
masti_Gai
10-27 08:20 AM
we need to take all the originals if we have to attend a visa stampin interview.
but for H4 i dont' know coz we will be in US and would it really really be safe to mail our original petition to India we being here.
Mine was a different situation i entered US without my petition papers as i had forgotten them. I realized it only when i switched my company that i didn't have my petition papers with me. I later on got i fedexed by ma parents.
but for H4 i dont' know coz we will be in US and would it really really be safe to mail our original petition to India we being here.
Mine was a different situation i entered US without my petition papers as i had forgotten them. I realized it only when i switched my company that i didn't have my petition papers with me. I later on got i fedexed by ma parents.
ufo2002
05-11 07:43 PM
Correct me if I am wrong but isn't that Roberto guy in the program an illegal who used 245i to get his GC? Sounds like he got his GC long before this retrogression hit, so did he skip LCA phase and went straight into 140/485?
more...
gsc999
01-07 03:23 AM
Many "promotions" offered by many corporations have this "condition" of winner being a "legal resident." I guess, maybe, H1B will come under that. GC is premanent resident. But here Toy R Us got caught between the fine print and being politically correct.
2010 and Non-Ferrous Metals are
bigboy007
06-04 12:58 PM
i too think so they wont drag it more
more...
bondgoli007
02-23 01:39 PM
Why people ask dumb questions. For me most of these questions are dumb and answers are obvious.
Easy on the guy pal! I am sure he would not have come here to seek help if the answers were so obvious to him.
unseenguy, A lot of companies all across the country are resorting to pay cuts and there is no guarantee that the job will remain either. Mine announced 5% cuts and cut other benefits that had made working in this company attractive.
I am sorry to hear about the job loss already in your household. Here is my suggestion....Do keep a lookout for better opportunities but try to get your wife a job before you change yours. Invoking AC21 is a option but use it only if you find a better opportunity or at least better stability. I know it is a cliche but hang in there and know that there are a lot of families all across this country who are in similar or worse situations. All the best and please fill in your details like PD and GC processing stage.
Easy on the guy pal! I am sure he would not have come here to seek help if the answers were so obvious to him.
unseenguy, A lot of companies all across the country are resorting to pay cuts and there is no guarantee that the job will remain either. Mine announced 5% cuts and cut other benefits that had made working in this company attractive.
I am sorry to hear about the job loss already in your household. Here is my suggestion....Do keep a lookout for better opportunities but try to get your wife a job before you change yours. Invoking AC21 is a option but use it only if you find a better opportunity or at least better stability. I know it is a cliche but hang in there and know that there are a lot of families all across this country who are in similar or worse situations. All the best and please fill in your details like PD and GC processing stage.
hair Ferrous amp; Non-Ferrous Metal
pachai_attai
09-04 09:05 AM
485 approved on August 31st. Approved 3 weeks after I sent out the RFE.
more...
kumar1
09-16 02:50 PM
Then what is the point asking others? You already know the answer.
I got past strip bars or junk like that long time back... I am going to do something similar to what you said. I am going to become more responsible citizen and would start enjoying life more..
I got past strip bars or junk like that long time back... I am going to do something similar to what you said. I am going to become more responsible citizen and would start enjoying life more..
hot ferrous Non Ferrous Metal
pa_arora
07-23 04:47 PM
Yes u should send all the docs relating to the case if u dont have the Receipt notice.
FP notice is a great idea, also because its a look alike to the Receipt notice.
FP notice is a great idea, also because its a look alike to the Receipt notice.
more...
house Non Ferrous Metal
Alabama04
12-12 11:43 AM
I am in Birmingham. Count me in.
PD: Jan 04 EB3/RIR/PBEC/AL
Labor: March 07
I-140: April 19, 07 (Regular)
I-485: June 27,07
Finger Printing: Aug 3,07
AP: Sept 07
RFE: Oct 10,07
GC: Still waiting:(
PD: Jan 04 EB3/RIR/PBEC/AL
Labor: March 07
I-140: April 19, 07 (Regular)
I-485: June 27,07
Finger Printing: Aug 3,07
AP: Sept 07
RFE: Oct 10,07
GC: Still waiting:(
tattoo Non-Ferrous Metals
polapragada
09-04 12:36 AM
Jeez! This is a really deplorable situation. USCIS has all the information and they are asking AILA for help? Why not just ask the guys who have their AOS cases pending? It's so unfortunate that this needs to be done.
You are right
You are right
more...
pictures Graphite for Non Ferrous Metal
rockstart
04-23 04:17 PM
Thanks for the response guys. I think it is better to change address because address forwarding does not work with USCIS letters. I have seen the trouble my friend had to go through to get his GC.
dresses Non ferrous metal prices voice
tonyHK12
01-31 09:29 AM
Definitely lets all agree to meet with our local house reps.
You can find your local congressman/woman from http://house.gov by entering your zip code.
They are generally very close to your geographic area.
Please ask if you have any questions, doubts.
You can find your local congressman/woman from http://house.gov by entering your zip code.
They are generally very close to your geographic area.
Please ask if you have any questions, doubts.
more...
makeup Non-Ferrous Metals (SF/D)
njboy
06-08 09:14 PM
There is a big difference between first class and economy class travel, and preventing a spouse who has already exhibited intent to immigrate from working for a very long time if they dont pay $1000.00 for premium processing of I-130. This is the reason I quoted the examples. Im not saying this from a "commie" point of view that everyone should own a Lada. While it is true that the employers should pay for premium processing, many people end up paying for it themselves, maybe in the form of reduced bonuses, or something else. Imagine what will happen when BCIS is swamped. We, desperate for a resolution for our problems, will end up cajoling our employers to drop a thousand dollars here for I-130 premium processing, another 1000 dollars for H1B premium processing because it already takes 5-6 months during regular processing. All Im saying is, fix the problem instead of finding band-aids.
girlfriend ferrous and non-ferrous
STAmisha
07-30 04:48 PM
Yes. It is called interfiling
hairstyles non-ferrous metals,
boreal
01-31 06:52 PM
OH boy! USCIS has found a new way of harassing us legal immigrants ;) come on guys! Know how to solve issues. Begin by not creating a thread at IV for such issues. Talk to your utility company folks, see whats happening. Check with your landlord to know why the meter reading is so high..If they have already charge your credit card, dispute it...start by talking with real people on the phone or maybe visit the utility company personally...for God's sake dont show your ignorance like this and give more fodder to SOBs like Matt....please!!
sagar_nyc
08-10 04:51 PM
WOW Man It's Awesome news .. Congratulations
\
Guys,
I am happy to share with you all that I applied my 485 on 1 week of June and it got approved today.
My PD was dec 2005. eb3. India.
Thought i would share with you all.:)
\
Guys,
I am happy to share with you all that I applied my 485 on 1 week of June and it got approved today.
My PD was dec 2005. eb3. India.
Thought i would share with you all.:)
suman
12-17 01:38 PM
Sorry I was away from my computer for a while.
Thanks for all your help Guys.
We are talking to Lawyer, Murthy law today.
It's an employment based.
This case of I-485 is 2004.
We talked to USCIS and they say to wait for notice and they do not have nay reason to tell over phone as they do not have access to NOTICE.
Hope Lawyer comes out with something.
THank you all
Great help and moral support from all of you at Immigration VOice.
Thanks for all your help Guys.
We are talking to Lawyer, Murthy law today.
It's an employment based.
This case of I-485 is 2004.
We talked to USCIS and they say to wait for notice and they do not have nay reason to tell over phone as they do not have access to NOTICE.
Hope Lawyer comes out with something.
THank you all
Great help and moral support from all of you at Immigration VOice.
No comments:
Post a Comment